Sharp VL-Z1U - Manual (Page 78)

64
Appendix
Appendix
Demonstration Mode
You can watch a brief demonstration of the
special camcorder features in Demo mode.
If the demonstration appears on the screen
when you turn on the camcorder for the first
time, cancel the Demo mode to use your
camcorder.
Watching
1
Remove the Mini DV cassette from
the camcorder (see page 9).
2
In Camera mode, press the DISPLAY
button until the mode screen appears.
3
Press l or m on the Operation
button to select “MENU”, then press
the center of the Operation button.
4
Press l or m to select “EXECUTE”,
then press the center of the Operation
button.
5
Press l or m to select Z, then
press the center of the Operation
button.
6
Press l or m to select “DEMO
MODE”, then press the center of the
Operation button.
7
Press l or m to select “ON”, then
press the center of the Operation
button.
8
Set the Power switch to OFF, then
hold down the Lock button and set
the Power switch to v.
• The demonstration begins.
Canceling
1
During the demonstration, press the
center of the Operation button to
pause the demonstration.
2
Perform step 3 to 6 in “Watching”,
then select “OFF” in step 7.
Notes:
• The demonstration will pause if you press the
center of the Operation button. If you leave it
for 60 seconds, or turn the power off
temporarily and then set the Power switch to
v
, the demonstration will begin again.
• Demonstration mode does not work in self
recording with reversed grip.
O T H E R S 1
R E T U R N
D EMO MO D E O F F
O N
B E E P
R EMO T E
D E F A U L T
L A N G U A G E
ON DEMO MODE