Sharp VL-Z1U - Manual (Page 86)

72
Appendix
Appendix
Symptom
POWER/CHARGE
(RED) indicator
flashes in red when
charging battery
pack.
Cannot edit to con-
nected VCR.
“E007” is displayed
on the screen, and
unable to operate
normally.
Possible cause
AC adapter or battery pack may
have malfunctioned.
Audio/video/S-video cable is not
properly connected.
The camcorder may be damaged.
Suggested solution
Call for service (p. 73).
Connect audio/video/S-video cable
properly (p. 55).
Do not take out a cassette, and call
for service (p. 73).
General
Notes:
• This unit is equipped with a microprocessor. Its performance could be adversely affected by
external electrical noise or interference. If this should happen, turn off the power and disconnect
the unit from any power sources, including the lithium battery, etc. Then reconnect the power
sources to resume operation.
• If the characters displayed in the viewfinder or on the LCD monitor screen appear to malfunc-
tion, disconnect the power source and remove the lithium battery, then reconnect the power
source, insert the lithium battery, and turn the power on again. The characters on the monitor
should be normal. Set the date and time, then resume operation.