SMC Networks SMC2670W - Manual (Page 14)

16
Section 3 | Setup
Typical uses for the SMC EZ Connect 2.4GHz 11 Mbps Wireless
Ethernet Adapter:
• Ethernet-enabled Printer
• PC with Ethernet port
• Set-top box, such as Ethernet-enabled cable TV box
• Point-of-Sale Terminal with Ethernet port
• Stereo Receiver system with Ethernet port
• Game Console System, such as Sony Playstation® 2 or
Microsoft Xbox®
The EZ Connect Wireless Ethernet Adapter default
configuration is:
SSID: ANY
Wireless Adapter Name: SMC
IP Address: 192.168.2.25
Subnet Mask: 255.255.255.0
Gateway: 192.168.2.1
The SMC2670W is a Plug-and-Play device. In most cases, the
SMC2670W does not require a configuration to get connected.
This seamless installation is because the default SSID configu-
ration of the adapter is “ANY”.When the SMC2670W is installed
on any one of the ethernet-enabled devices listed above, it will
automatically connect to any wireless network within range.