SMC Networks SMC2670W - Manual (Page 24)

26
3. When you have completed configuring the wireless settings
and/or password, click [Apply] to save the settings and
reboot the SMC2670W.
4. Log back into the EZ Connect Wireless Ethernet Adapter.
5. Click on the [TCP/IP] section link and then click the [Setup]
option.
From this section, you can configure the following settings:
• IP Address
• Subnet Mask
• Gateway
Note: Since the SMC2670W acts as a transparent device on
your network, the main function of configuring an IP
Address on the Wireless Ethernet Adapter is so you can
access the web administration page.
6. When you have completed the Wireless Ethernet Adapter
TCP/IP configuration, click [Apply] to save your settings and
reboot the SMC2670W.