Sony SIR4260V - Manual (Page 17)

COLOR DOME CAMERA User Guide 32 COLOR DOME CAMERA User Guide 33
Specifications
※ The specification for this product may change without prior notice for product improvement.
SIR-4260VN SIR-4260VP
ELECTRICAL
Input Voltage
DC 12V ± 10% / AC 24V ± 10%
Power Consumption Max 5W (LED ON)
VIDEO
Imaging Device
1/3 inch, Diagonal 6mm Super HAD CCD
Total Pixels 811(H) x 508(V) 795(H) x 596(V)
Effective Pixels 768(H) x 494(V) 752(H) x 582(V)
Scanning System 2:1 Interlace
Synchronization Internal /Line-Lock
Frequency H : 15.734KHz V : 59.94Hz H : 15.625KHz V : 50.00Hz
Horizontal Resolution COLOR : 600TVL, B/W : 700TVL
Min. Illumination LED ON : 0Lux / LED OFF : 0.15Lux(Color, F1.2), 0.0003Lux(Color,SENS-UP x512)
Visibility distance(IR LED) 30m(10EA)
S/N (Y Signal) 52dB (Weight On, AGC Off)
Video Output CVBS : 1.0Vp-p, 75Ω composite
LENS
Zoom Ratio
3.6x (Manual)
Focus Length 2.8 ~ 10.0mm (F1.2)
Angular Field of View H : 94.4°(Wide) ~ 28°(Tele) / V : 69.2°(Wide) ~ 21°(Tele)
PAN / TILT / ROTATE
Pan / Tilt / Rotate Range
0 °~ 340°/ 0°~ 146°/ 0°~ 340°
OPERATIONAL
Electronic Shutter Speed
1/60 ~ 1/120k sec 1/50 ~ 1/120k sec
On Screen Display NTSC : 7 Languages, PAL : 15 Languages
SSDR On / Off (Level adjustable)
Backlight Compensation BLC / HLC / OFF
Day & Night COLOR / B/W / AUTO (ICR)
Gain Control Low / High / Off
White Balance ATW /Outdoor / Indoor / Manual / AWC (1,700°K ~ 11,000°K)
SENS-UP (frame Integration) Auto /Off (Selectable x2 ~ x512)
Motion Detection On / Off (8 Programmable zones)
Privacy Masking On / Off (12 Programmable zones)
3D Noise Filter (SSNRIII) On / Off (Level adjustable)
Digital Zoom On / Off (x1 ~ x16)
Digital Image Stabilization(DIS) On / Off
Camera Title On / Off (Displayed 15 Characters)
Sharpness On / Off (Level adjustable)
Flip / Mirror On / Off
Communication Coaxial, RS-485
Protocol
Coaxial(Pelco), RS-485(STW(SPD), PELCO-P, PELCO-D, VICON, PANASONIC, BOSCH,
HONEYWELL, SEC)
ENVIRONMENTAL
Operating Temperature / Humidity
-10°C ~ +50°C / 30% ~ 80% RH
MECHANICAL
Water Resistance
IP66
Dimension (Weight) Ø148 x 126mm (1.3Kg)
Troubleshooting
If you have trouble operating your camera, refer to the following table.
If the guidelines do not enable you to solve the problem, contact an authorized technician.
• Nothing appears on the screen.
▶ Check that the power cord and line connection between the camera and monitor are
fixed properly.
▶ Check that you have properly connected UTP cable or BNC cable to the camera.
• The image on the screen is dim.
▶ Is lens stained with dirt? Clean your lens with soft, clean cloth.
▶ Set the monitor to proper condition.
▶ If the camera is exposed to too strong light, change the camera position.
• The image on the screen is dark.
▶ Adjust the contrast feature of the monitor.
▶ If you have an intermediate device, set the 75Ω / Hi-z properly.
• The camera is not working properly, and the surface of the camera is hot.
▶ Check that you have properly connected the camera to an appropriate power source.
• The SENS-UP function does not work.
▶ Check that AGC of EXPOSURE SETUP menu is ‘OFF’.
▶ Check that SHUTTER of EXPOSURE SETUP menu is ‘A.FLK’ or ‘MANUAL’.
• The Motion Detection function does not work.
▶ Check that MOTION DET of SPECIAL SETUP menu is ‘OFF’.
• Color is not correct.
▶ Check the setting of WHITE BAL SETUP menu .
• The screen flickers continually.
▶ Check that direction of camera turns toward the Sun.
• When coaxial communication is not available:
▶ Make sure that the camera and monitor are installed within the recommended distance.
▶ Use the video amplifier equivalent to coaxitron if the recommended installation distance
is exceeded.