Seiko Group SII IP-6600 - Manual (Page 75)

2-31
Section 2 Basic Operations
Replacing Ink Cartridges
This section describes how to replace an ink cartridge.
Ink cartridges should be replaced in the following two cases:
- If ink has run out
- If an ink cartridge is not installed
The ink cartridge replacement procedure in the following each case
is explained below.
Ink Cartridge Replacement Procedure
1
Open the ink cover.
Ink cartridge
- Do not remove an ink cartridge under the following
conditions.
Depending on the printer status, the ink spills within the
ink box, causing a trouble.
- In case that no power is supplied to the printer because
of a power failure or printer breaker off.
- In case that an error other than ink end has occurred.
- If the cartridge in which the ink remains is replaced, do so
in the offline mode.
(=> "Section 3 Ink Menu (5)")
- Make sure the upside and downside of the ink cartridge
before installing.
NOTE
Push here to open/close the ink cover.