Sony WEGA KV-36XBR250 - Manual (Page 21)

15
Press when you want to turn connected equipment on and off.
Press when you want to control connected equipment with your remote control, (see
pages 32-34 for instructions on programming your remote control).
Use for direct channel selection. Press 0-9 to select a channel, the channel will
change after 2 seconds, or you can press ENTER for immediate selection.
Cycles through the VIDEO MODE settings: VIVID, STANDARD, MOVIE, SPORTS .
Alternates back and forth between the last two channels selected with the 0-9 keys.
Instantly turns off the sound. Press again or press VOL + to restore sound.
Turns the TV off in approximately 30, 60, or 90 minutes. Cancel by pressing until
SLEEP OFF appears.
Press to return to factory settings while in an on-screen menu.
Watching the TV
The following chart explains more advanced buttons
on your remote control.
Using the White Labeled Buttons for TV Operations
REFER TO THE
ILLUSTRATION OF THE
REMOTE CONTROL ON THE
INSIDE FRONT COVER OF
THIS MANUAL AS YOU
REVIEW THIS CHART
TV
VTR/DVD SAT/CABLE
POWER
VTR/DVD SAT/CABLE
FUNCTION
TV
– 9 0
MODE
PICTURE
JUMP
MUTING
SLEEP
RESET