Sony WEGA KV-36XBR250 - Manual (Page 9)

3
A • VHF only
or
• VHF/UHF
or
• Cable
B
• VHF only
or
• UHF only
or
• VHF/UHF
C
• VHF
and
• UHF
Note about the AC Power Cord
The AC power cord is attached to the rear of
the TV with hooks. Use caution when
removing the AC plug from its holder. Gently
slide the cord in the upward direction, without
removing the cord from the two lower hooks.
Cable or Antenna Connections
Connecting directly to cable or an
antenna
The connection you choose will depend on the
cable found in your home. Newer homes will
be equipped with standard coaxial cable (see
A ); older homes will probably have 300 -ohm
twin lead cable (see B ); still other homes may
contain both (see C ).
Antenna connector
(Rear of TV)
VHF/UHF
300-ohm twin
lead cable (Rear of TV)
VHF/UHF
75-ohm
coaxial cable
75-ohm coaxial cable
300-ohm twin lead cable
(Rear of TV)
VHF/UHF
U/V mixer
(not supplied)
Cable and antenna
If your cable provider does not feature local
channels, you may find this set up convenient.
Select CABLE or antenna (ANT) mode by
pressing ANT on the remote control.
Note
In order to receive channels with an antenna,
you will need to turn your CABLE to OFF and
perform the AUTO PROGRAM function, (see
page 26).
(Rear of TV)
AUX
VHF/UHF
TO CONVERTER
(No connection "TO
CONVERTER" in this case)
CATV cable
Antenna cable
Do not remove
the cord from
these hooks.
AC Power
cord
You can
detach the
cord from
this hook