Setting up the remote, Controlling tvs with the remote, Basic h o ok ups and set tings – Sony RDR-GX3 User Manual

Page 25: Code numbers of controllable tvs

Advertising
background image

25

Setting Up the Remote

Basic H

o

ok
ups and Set

tings

Setting Up the Remote

You can control your TV with the supplied remote by adjusting
the remote control’s signal.

Notes

• Depending on the connected unit, you may not be able to control your

TV with some or all of the buttons below.

• If you enter a new code number, the code number previously entered

will be erased.

• When you replace the batteries of the remote, the code number may be

reset to the default setting. Set the appropriate code number again.

Controlling TVs with the remote

a Slide the TV/DVD switch to TV.

b Hold down [/1.

c Enter your TV’s manufacturer code (see

“Code numbers of controllable TVs” below)
using the number buttons.

d Release [/1.

When the TV/DVD switch is set to TV, the remote
performs the following:

* If you use number buttons to select the TV’s programme position,

press -/-- followed by the number buttons for two-digit numbers.

To operate the TV/DVD button
(for SCART connections only)

The TV/DVD button switches between the recorder and the last
input source selected on the TV. Point your remote at the
recorder when using this button. The button works even if the
TV/DVD switch is set to DVD.
When you connect the recorder to the TV via the SCART
(EURO AV) jacks, the input source for the TV is set to the
recorder automatically when you start playback. To watch
another source, press the TV/DVD button to switch the TV’s
input source.

Code numbers of controllable TVs

If more than one code number is listed, try entering them one at
a time until you find the one that works with your TV.

[/1

Turns your TV on or off

2 (volume) +/–

Adjusts the volume of your TV

(wide mode)

Switches to or from the wide mode of a
wide-screen TV

t (TV/video)

Switches your TV’s input source

PROG +/–,
Number buttons, -/--*

Selects the programme position on
your TV

TV/DVD switch

"

/

1

PROG +/–

2

+/–

t

Number buttons,
-/--

Manufacturer

Code number

Sony

01 (default)

Aiwa

01 (default)

Grundig

11

Hitachi

24

Loewe

08, 45

Nokia

15, 16, 69

Panasonic

17, 49

Philips

06, 07, 08

Saba

12, 13

Samsung

06, 22, 23

Sanyo

25

Sharp

29

Telefunken

36

Thomson

43

Toshiba

38

,

continued

Advertising