Sony RDR-GX3 - Manual (Page 94)

94
Specifications
Specifications
System
Laser
Semiconductor laser
Channel coverage
PAL/SECAM (B/G, D/K, I, L)
VHF: E2 to E12, R1 to R12, F1 to
F10, Italian A to H, Ireland A to J,
South Africa 4 to 13
UHF: E21 to E69, R21 to R69, B21
to B69, F21 to F69
CATV: S01 to S05, S1 to S20,
France B to Q
HYPER: S21 to S41
The above channel coverage merely
ensures the channel reception within
these ranges. It does not guarantee the
ability to receive signals in all
circumstances.
Video reception: Frequency synthesizer
system
Audio reception: Split carrier system
Aerial out
75-ohm asymmetrical aerial socket
Timer
Clock: Quartz locked
Timer indication: 24-hour cycle
(digital)
Power back-up duration: 1 hour
Video recording format
MPEG Video
Audio recording format/applicable bit
rate
Dolby Digital/2 ch, 256 kbps
Audio characteristics (Playback)
Frequency response
DVD (PCM 96 kHz): 4 Hz to 44 kHz
(±1.0 dB)/DVD (PCM 48 kHz): 4 Hz
to 22 kHz (±0.5 dB)/CD: 4 Hz to 20
kHz (±0.5 dB)
Signal-to-noise ratio (S/N ratio)
DVD: 115 dB (LINE 2 OUT
(AUDIO L/R) jacks only)
Harmonic distortion
DVD: 0.002 %
Dynamic range
DVD: 110 dB/CD: 100 dB
Wow and flutter
DVD: Less than detected value
(0.001% W PEAK)
Audio characteristics (Recording/
Playback)
Frequency response
DVD (Dolby Digital 48 kHz):
10 Hz-20 kHz (±1.0 dB)
Signal-to-noise ratio
DVD: 96 dB
Harmonic distortion
DVD: 0.004 %
Dynamic range
DVD: 96 dB
The signals from LINE 2 OUT (AUDIO
L/R) jack are measured. When you play
PCM sound tracks with a 96 kHz
sampling frequency, the output signals
from the DIGITAL OUT (COAXIAL)
jack are converted to 48 kHz sampling
frequency.
Inputs and outputs
LINE 2 OUT
(AUDIO)
Phono jack
Output level: 2 Vrms
Load impedance: 10 kilohms
(VIDEO)
Phono jack
Output level: 1.0 Vp-p
(S VIDEO)
4-pin mini DIN
Output level: Y:1.0 Vp-p, C: 0.3
Vp-p (PAL)
LINE 4 IN
(AUDIO)
Phono jack
Input level: 2 Vrms
Input impedance:
more than 22 kilohms
(VIDEO)
Phono jack
Input level: 1.0 Vp-p
(S VIDEO)
4-pin mini DIN
Input level: Y:1.0 Vp-p, C: 0.3 Vp-p
(PAL)
LINE 2 IN
(AUDIO)
Phono jack
Input level: 2 Vrms
Input impedance:
more than 22 kilohms
(VIDEO)
Phono jack
Input level: 1.0 Vp-p
(S VIDEO)
4-pin mini DIN
Input level: Y:1.0 Vp-p, C: 0.3 Vp-p
(PAL)
LINE 1 -TV
21-pin
CVBS IN/OUT
S-Video/RGB OUT (upstream)
LINE 3/DECODER
21-pin
CVBS IN/OUT
S-Video/RGB IN
S-Video OUT (downstream)
Decoder
DIGITAL OUT (COAXIAL)
Phono jack
Output level: 0.5 Vp-p
Load impedance: 75 ohms
COMPONENT VIDEO OUT(Y, C
B
, C
R
)
Phono jack
Output level: Y: 1.0 Vp-p/C
B
, C
R
: 0.7
Vp-p
General
Power requirements
220-240 V AC, 50/60 Hz
Power consumption
43 W
Dimensions (approx.)
430
Ч 89 Ч 380 mm (width/height/
depth) incl. projecting parts
Mass (approx.)
5.3 kg
Operating temperature
5 ºC to 35 ºC
Operating humidity
25 % to 80 %
Supplied accessories
Audio/video cord (1)
Mains lead (1)
Aerial cable (1)
Remote commander (remote) (1)
R6 (size AA) batteries (2)
Compatible colour systems
This recorder is designed to record using
the PAL colour system and play back
using the PAL or NTSC colour systems.
The signals of the SECAM colour
system can be received or recorded but
played back in the PAL colour system
only. Recording of video sources based
on other colour systems cannot be
guaranteed.
Specifications and design are subject to
change without notice.