Sony STR-V323 - Manual (Page 9)

9 GB
Getting Started
Notes
• If you want to enjoy the surround sound, be sure to
connect the front speakers to the SPEAKERS FRONT A
terminal.
• No sound is heard when you press SPEAKERS A+B
without connecting speaker system B.
Where do I go next?
To complete your system, go to “AC Hookups” on this page.
AC Hookups
Connecting the mains lead
Connect the mains lead from this receiver and from
your audio/video components to a wall outlet. If you
connect other audio components to the SWITCHED
AC OUTLET on the receiver, the receiver can supply
power to the connected components so you can turn
on/off the whole system when you turn on/off the
receiver.
Caution
Make sure that the power consumption of the component
connected to the receiver’s AC outlet does not exceed 100
watts. Do not connect high-wattage electrical home
appliances such as electric irons, fans, or TVs to this outlet.
Where do I go next?
Before you use the receiver, go to the next section to make
sure that all the controls are set to the appropriate positions.
to a wall outlet
SWITCHED AC OUTLET
/
Before You Use Your Receiver
Before turning on the receiver, make sure that you
have:
• Turned MASTER VOLUME to the leftmost
position (0).
• Selected the appropriate speaker system. (See
“Selecting the speaker system” on previous page.)
• Set BALANCE to the center position.
Before you use your receiver for the first time or when
you want to clear the receiver's memory, do the
procedure below:
1
Turn off the receiver.
2 Press 1/u (power) for more than 4 seconds.
“INITIAL” appears in the display and the items
including the following are reset or cleared:
• All preset stations are reset to their factory
settings.
• All sound field parameters are reset to their
factory settings.
• All index names (of preset stations and
programme sources) are cleared.
• All adjustments made with the SET UP button are
reset to their factory settings.
• The sound field memorized for each programme
source and preset station is cleared.
Turn on the receiver and check the following indicator.
• Press MUTING or MUTING on the remote if the
MUTING indicator turns on.
1/u (power)
MUTING