Sony ICD-UX300F - Manual (Page 111)

111 GB
Tr
oub
le
sh
oot
in
g
The IC recorder does not
operate correctly. • Take out the battery and insert it again (page 9).
The IC recorder does not
operate. • You may have formatted the memory of the IC recorder using the
computer. Use the IC recorder formatting function to format the
memory (page 82).
The IC recorder is not
recognized by your
computer.
A folder/file cannot be
transferred from your
computer. • Disconnect the IC recorder from your computer and reconnect it.
• Do not use a USB hub or USB extension cable other than the
supplied USB connection support cable. Connect the IC recorder
directly to your computer or use the supplied USB connection
support cable.
• Operation is not guaranteed if you use any system requirements
other than those described on page 99.
• Depending on the USB port position, the IC recorder may not be
recognized. If this happens, try another port.
The file transferred from
your computer cannot be
played back. • The file format may differ from those that can be played back
using the IC recorder (MP3/WMA/AAC-LC).
The computer cannot start. • If you reboot the computer with the unit connected to the
computer, the computer may freeze or may not start properly.
Disconnect the unit from the computer and reboot the computer
again.
Symptom Remedy