Sony STRDG800 - Manual (Page 81)

81 US
F:\Sony SEM
HA\Revision2_DG800\JC060412_2667346121DG800_US\2667346121\US05AMP_STR-DG800-
CEL.fm masterpage: Right
STR-DG800
2-667-346-12 (1)
Other Oper
ations
Watching HDMI images
from other inputs
(HDMI VIDEO ASSIGN)
You can reassign an HDMI video input to
another input.
1
Press AMP and then press
MENU.
“1-LEVEL SET” appears on the display.
2
Press control button V/v
repeatedly to select “6-VIDEO
SET”.
3
Press the control button or
control button
b to enter the
menu.
4
Press control button V/v
repeatedly to select
“HDMI V. ASSIGN”.
5
Press the control button or
control button
b to enter the
parameter.
6
Press control button V/v
repeatedly to select the HDMI
video input you want to
reassign (for example, DVD).
7
Press the control button or
control button
b to enter your
selection.
8
Press control button V/v
repeatedly to select the input
you want the HDMI video input
selected in step 6 to be
reassigned to (for example,
VIDEO 1).
In this case, select “DVD–VIDEO 1”.
When you press VIDEO 1, the image
from the component connected to the
VIDEO 1 jacks will be a HDMI image.
The sound will be output from the TV
speaker. For details, see “Hooking up
components with HDMI jacks” (page 30).
The input you can reassign to varies for
each HDMI video input. For details, see
“Assignable inputs for HDMI video
input” below.
To return to the previous display
Press control button B.
Assignable inputs for HDMI
video input
Notes
• You cannot reassign more than one HDMI video
input to the same input.
• You cannot use the HDMI video input as the
original input when it has been reassigned to
another input.
HDMI video
input Assignable
inputs Display
DVD VIDEO 1 DVD–VIDEO 1
VIDEO 2 DVD–VIDEO 2
VIDEO 3 DVD–VIDEO 3
DVD DVD–DVD
MD/TAPE DVD–MD/TAPE
SA-CD/CD DVD–SA-CD
TV/SAT VIDEO 1 TV/SAT–VIDEO 1
VIDEO 2 TV/SAT–VIDEO 2
VIDEO 3 TV/SAT–VIDEO 3
TV/SAT TV/SAT–TV/SAT
MD/TAPE TV/SAT–MD/
TAPE
SA-CD/CD TV/SAT–SA-CD
US01COV_STR-DG800-CEL.book Page 81 Tuesday, March 14, 2006 3:53 PM