Sony VGX-XL1 - Manual (Page 122)

114
Loading Media Changer Unloading Media Changer
1 Make sure the Media Changer/
Recorder is properly connected to
the Personal Computer and is turned
on.
Note : When loading discs, make
sure that the label if facing to the
right of the slot.
2 To load a single disc, press the
Load button once and insert the disc
in the slot.
To load multiple discs, press the
Load button twice and insert each
disc in the slot one at a time.
3 Once the discs have been inserted,
they must be recognized by Media
Center before they can be viewed.
Go to More Programs or My DVDs
and select Manage Discs .
4 Click Yes on the NEW DISCS
FOUND message to update your
library with the new disc(s)
information.
To eject discs using Media Center:
1 From Media Center, go to My
Changer and select Manage Discs .
2 Select the disc you wish to eject.
3 The disc moves to the drive. Then
select the
arrow to eject the disc.
To eject discs manually:
1 Press the Eject button one time to
eject the last inserted disc.
or
2 Press the Eject button two times to
eject all discs in the changer slots.
This will not eject the last disc in the
changer drive. You must go to Media
Center to eject the last disc. See
steps 1 through 3 of To eject discs
manually.