SharkRack 45U - Manual (Page 21)

SharkRack Enclosure Installation Guide
ID-00210-000 REV D, ECO2773 Page 21 of 46
Adjusting the Leveling Feet
Step Detail
The leveling feet help stabilize the cabinet and
keep the cabinet level on uneven floors. This
should be done before you install products into
the cabinet.
1. Locate the (4) leveling feet. There is one
in each corner as shown.
2. Loosen the Jam Nut.
Figure 18
42U X 37DP Shown
3. Lower the leveling feet. Rotate the leveling
feet clockwise from inside the cabinet using
a straight blade screwdriver or from
underneath the cabinet using the supplied
9/16” wrench. The levelers should plant
firmly to the floor.
Figure 19
42U X 37DP Shown