Sony DSX-S310BTX - Manual (Page 36)

36
• Before receiving phonebook data, disconnect any
cellular phone or audio device.
• To cancel the transfer of phonebook data, operate
the cellular phone.
• If the power supply lead is disconnected, the stored
phonebook data will be erased.
Deleting from the phonebook in this
unit
1 Press (SOURCE/OFF) repeatedly until
“Bluetooth Phone” appears.
2 Press (BROWSE).
The phonebook appears.
3 Rotate the multi-way encoder to select an
initial from the initial list, then press it.
4 Rotate the multi-way encoder to select a name
from the name list, then press it.
5 Rotate the multi-way encoder to select “Delete
Contact” from the number list, then press it.
6 Rotate the multi-way encoder to select “Yes,”
then press it.
To clear all phonebook data, select “Delete All”
in step 3. After clearing, confirm that all
phonebook data has been cleared properly.
Preset dial
Contacts (up to 6) of the phonebook in a cellular
phone can be stored in the preset dial.
1
Press (SOURCE/OFF) repeatedly until
“Bluetooth Phone” appears.
2
Push the multi-way encoder up/down
to select the preset number
(“Preset 1” to “Preset 6”) to store.
3
Push the multi-way encoder right to
enter storing mode.
“Waiting…” appears.
4
Send the phonebook data by
operating the cellular phone.
The contact is stored in the selected preset
number.
Voice dial activation
You can activate voice dialing with a cellular
phone connected to this unit by saying the voice
tag stored on the cellular phone, then make a call.
1
Press (SOURCE/OFF) repeatedly until
“Bluetooth Phone” appears.
2
Press the multi-way encoder.
“Please say the name…” appears.
3
Say the voice tag stored on the cellular
phone.
Your voice is recognized, and the call is
made.
Notes
• Check that unit and cellular phone are connected
beforehand.
• Store a voice tag on your cellular phone beforehand.
• If you activate voice dialing with a cellular phone
connected to this unit, this function may not work in
some cases.
• Noises such as the engine running may interfere
with sound recognition. In order to improve
recognition, operate under conditions where noise is
minimized.
• Voice dialing may not work in some situations,
depending on the effectiveness of the cellular
phone’s recognition function. For details, see the
support site.
• Do not use voice dialing on the cellular phone during
handsfree device connection.
Tips
• Speak in the same way as you did when you stored
the voice tag.
• Store a voice tag while seated in the car, via this unit
with Bluetooth Phone source selected.
SMS indicator
While connecting a cellular phone to this unit,
the SMS indicator informs you of any incoming
or unread SMS messages.
If you receive a new SMS message, the SMS
indicator flashes.
If there are any unread SMS messages, the SMS
indicator stays lit.
Note
Function of the SMS indicator may depend on the
cellular phone.