Sharp Aquos LC 26D5U - Manual (Page 15)

14
Part names
TV (Rear)
* Press RESET if the TV cannot return to its original state after performing various operations.
• AV MODE resets to DYNAMIC (Fixed)
• TV channel returns to initial channel (Air:2ch, Cable:1 or 2ch)
• Audio setting initializes
• Dolby Virtual resets to off
• Image position initializes
** Press SYSTEM RESET if the TV does not operate after starting up.
NOTE
• Pressing RESET will not work if the TV is in standby mode.
• Pressing RESET will not delete channel preset or secret number. See page 78 for clearing the secret number when you
know it. See page 98 for initializing to the factory preset values when you forget your secret number.
RESET*
INPUT 3
terminals
SYSTEM
RESET**
ANALOG IN
terminal
AC INPUT terminal
RS-232C terminal
INPUT 2 terminals
INPUT 1
terminals
INPUT 5 terminals
INPUT 4 terminal
MONITOR OUT/
REC OUT terminals
i.LINK terminals
CableCARD™ slot
DIGITAL AUDIO
OUTPUT terminal
G-LINK terminal
DIGITAL AIR IN
terminal
DIGITAL CABLE
IN terminal