Sharp Aquos LC 26D5U - Manual (Page 23)

22
Watching TV (TV Guide On Screen)
The TV Guide On Screen system will conduct
a series of tests and when the testing is
completed the next screen will be displayed
automatically.
Do not press any buttons while testing is in
progress.
Is your cable box now tuned to channel
09?
Press a/b to select “Yes”, “No” or “Test this
code again”, and then press ENTER.
11
Do you have an antenna connected to
your TV?
Press a/b to select “Yes” or “No”, and then
press ENTER.
• If you select “Yes”, go to the next step.
• If you select “No”, a different code is tested in
the previous screen.
• If you select “Test this code again”, the same
code is tested again in the previous screen.
• If you select “Yes”, go to the next step.
• If you selected “No” in step 3, you must connect
an antenna to your TV and select “Yes” to
receive a channel lineup and listings.
Tune your cable box to channel 02.
Make sure to leave your cable box turned
on, and then press ENTER.
10
9
Selecting the cable box brand name.
Press a/b to select the cable box brand,
and then press ENTER.
8
12
Are the settings correct?
Confirm the settings displayed on the screen
and press a/b to select “Yes, end setup”
or “No, repeat setup process”, and then
press ENTER.
Press ENTER to continue.
• Press a/b to view more cable box brands.
NOTE
• Please do not use the CableCARD while using cable box.