Sony CMT-LS1 - Manual (Page 11)

11
Getting Started
Tip
The preset stations are retained for a day even if you
disconnect the AC power cord or if a power failure
occurs.
To erase a preset number
1 Press – on the remote in step 5 of “Presetting
radio stations”.
A preset number flashes.
2 Press TUNER +/– to select the preset number
you want to erase.
To erase all the preset numbers, select “ERA
ALL”.
3 Press ENTER.
The total number of preset stations decreases by
one each time you erase a preset number.
You can add new preset numbers after the last
preset number.
Opening the front panel
You can open the front panel automatically simply
by bringing your hand near the front panel. You
can also open and close the panel using the OPEN/
CLOSE button located on top of the unit. This
panel open setting is made using the PANEL
OPEN switch located on top of the unit.
You can select ON/AUTO, AUTO or MANUAL
using the PANEL OPEN switch located on top of
the unit.
PANEL OPEN switch
OPEN/CLOSE
continued