Sony CMT-LS1 - Manual (Page 17)

The CD Player
17
6
To program additional tracks, repeat
steps 3 to 5.
You can make a program up to 32 tracks.
7
Press CD N.
All the programed tracks play in the order
you selected.
To cancel Program Play
Press PLAY/TUNING MODE repeatedly until
“PROGRAM” and “SHUFFLE” disappear from
the display.
To change the program
You can change the program before you start
playing.
To Do this
Clear the entire
program Do steps 1 and 2 then press x
in stop mode.
Add a track to the
program Do steps 3 to 5.
To select the desired track using
number buttons
Press number buttons instead of performing steps
4 to 6.
To enter track numbers 11 or over, press >10 once
and then the number buttons of the track number.
For example, to select track 32, press >10 once,
then 3, and 2.
Tips
• The program you made remains after Program Play
finishes. To play the same program again, press
CD N (or NX on the unit).
• “--.--” appears when the total playing time has
exceeded 100 minutes, or when you select a track
whose number is 21 or over.
• If you try to program 33 or more tracks, “FULL”
appears.
• You can also select a CD by using DISC 1 – 5 on
the unit in step 3.
Programing the CD
tracks
— Program Play
You can make a program up to 32 tracks from all
the CDs in the order you want them to be played.
–
+
– +
>10 10/0
8 9 7
5 6 4
2 3 1
m M
–
+
x
. >
N X
1
2,5
3
4
7
x
1
Press FUNCTION repeatedly until
“CD” appears.
2
Press PLAY/TUNING MODE
repeatedly until “DISC PROGRAM”
appears.
3
Press DISC SKIP repeatedly to select
the desired CD.
4
Press . or > repeatedly until the
desired track appears in the display.
5
Press PLAY/TUNING MODE.
The track is programed.