Samsung SMT-190Dx - Manual (Page 28)

Chapter 6 : Recording
6-1) REC (Normal)
Press the ( ) button to record the live screen. The LED
on the record button turns on, the mark is displayed in the
screen to indicate the HDD recording. All eight sources
will be recorded simultaneously.
07/01/05 00:00:01
CAM1 CAM CAM
CAM CAM5 CAM6
CAM7 CAM8
Note
If the user is in the menu, the recording does not
start by pressing the ( ) button .
To start the recording, press the ( ) button after the
user exits from the menu.
Caution
If the input video signal is disconnected during the
recording, the recording is stopped. The system re-
sumes the recording as soon as the input video signal
is connected normally. The system does not start the
recording when no video signal is received.
6-2) Record Stop
Click the stop button to stop the data being recorded.
- REC mark disappears and the recording is stopped.
07/01/05 00:00:01
CAM1 CAM CAM
CAM CAM5 CAM6
CAM7 CAM8
Note
Press the Menu button after you stop the recording
first and the menu screen will be displayed.
Chapter 7 : Search Menu
7-1) SEARCH MENU
To search the data recorded, press the ( ) button in
the LIVE mode. The following menu is displayed.
07/07/07 00:00:01
SEARCH MENU
DATE TIME SEARCH
RECORD EVENT SEARCH
ALARM EVENT SEARCH
LOSS EVENT LIST
POWER EVENT LIST
- DATE/TIME SEARCH : Searches data recorded by
Date or Time.
- RECORD EVENT SEARCH: Searches all of data
recorded in normal recording mode.
- ALARM EVENT SEARCH : Searches data recorded
by occurrence of Alarm or Motion.
- LOSS EVENT LIST : Displays the channel and time
information when the video loss occurs.
- POWER EVENT LIST : Displays the time information
when the power goes on/off.
Caution
The current date and time are shown in the Date/
Time Search Menu. The List is not displayed in the
Event Search Menu because there is no data in the
HDD at the time of shipment.
7-2) DATE TIME SEARCH
07/07/07 00:00:01
DATE TIME SEARCH
DATE [ YY / MM / DD ] 07/07/07
TIME [ HH : MM : SS ] 0:0:5
[SEARCH START]
SEARCH START : 07/07/07 0 :  : 9
SEARCH END : 07/07/07 0 : 9 : 
1. DATE[YY/MM/DD]
- Set a date to search[YY,MM,DD].
- Use the , , , , key to change the date.
2. TIME[HH:MM:SS]
- Set a time to search.
- Use the , , , , key to change the time.
Eng-8
USER'S MANUAL