Samsung SMT-190Dx - Manual (Page 38)

Eng-8
USER'S MANUAL
1-2. Network Configuration : DHCP Client
1) If the IP of the SMT-190DN Server is DHCP :
Choose "DHCP Client".
) Type in the addresses of DNS 1 and DNS .
) Click Apply button to apply the settings.
If you click Reset button, the latest setting will be
applied again.
Click Back button if you don't want to apply the
setting.
) If the mac address of an user is XX:XX:XX:FF:00:00,
a user who uses DDNS but does not know the IP can
connect the Viewer by typing as follows in the URL.
EX) http://wff0000.websamsung.net
Note
MAC Address.
Locate the MAC Address of the SMT-190DN (each
SMT-190DN has its own unique MAC address). It can
be checked in “ 5-9) NETWORK SETUP ” function
and setting method of SETUP MENU.
It is the last 6 digits as shown below.
07/07/07 00:00:01
NETWORK SETTING
1. NETWORK ACCESS STATIC...
. HTTP PORT 00080
. PICTURE QUALITY
NETWORK STATUS
IP ADDR 19.168.1.
GATEWAY 19.168.1.65
SUBNETMASK 55.55.55.0
DNS 1 168.16.6.1
DNS  168.16.6.
MAC ADDR 00:0:6f:ff:00:00
DDNS ADDR wff0000.websamsung.net
MENU -> SETUP MENU -> NETWORK SETUP
2. PPPoE (DSL) for Eth0
1) Service : Decide if you want to try PPPoE Connection
or not.
) User ID : User's ID that is registered in the ISP.
) User Password : User's password that is registered in
the ISP.
4) Confirm Password : Confirm the password.
5) DNS (Domain Name Service) : Service to convert
a Domain Name (ex. www.yahoo.com) into an IP
address (ex. 16.109.17.8).
The SMT-190DN Server uses this service to join the FTP
server or other webs by the Domain Name.
DSL service supports only PPPoE (Point to Point over
the Ethernet).
 DNS is a default value, so it does not need to be
changed.
Note
When connecting, ID & PASSWORD are limited to 40
characters.