Chapter 2 : system components and installation, 1) requirements for installation and safety – Samsung SMT-190Dx User Manual

Page 7

Advertising
background image

USER'S MANUAL

Eng-7

Caution

SMT-190DN is fitted with a 250GB HDD and this HDD

can change with a new one.

Our Company guarantees only SEAGATE 250GB

ST3250820ACE as HDD.

Chapter 2 :

System Components
and Installation

2-1) Requirements for installation and

safety

This section describes the requirements for safe
installation and use.
Install the product on a flat table or in a rack. It should
be used only when level and should not be
used when standing vertically or at an acute angle.
The location in which the main system is installed and
the configuration of the room are very important
for proper operation of the system.
When the products are installed too closely together
or the location is poorly ventilated, the system
may not operate properly and maintenance of the
system may be difficult. Sufficiently circulate the
air within the system operating room and tightly fasten
the cover of the main system to prevent
malfunction and reduce system downs due to

environmental causes. There are high voltage parts

inside. Do not open the cover.

Install the product in a place that meets the following
environmental conditions. Be sure to maintain
the system under the temperatures and humidity
conditions given below:
• Operating temperature : 0°C ~ 0°C (°F ~ 10°F)
• Storage temperature : -0°C ~ 60°C (-°F ~ 10°F)
• Operating humidity : 0% ~ 85% RH
• Storage humidity : 0% ~ 95% RH
• Input voltage : AC 100V ~ 0V
• Power usage : less than 85 Watts
• Frequency : 60Hz/50Hz

LAMP(S) INSIDE THIS PRODUCT CONTAIN MERCURY AND

MUST BE RECYCLED OR DISPOSED OF ACCRDING TO LOCAL,

STATE OR DISPOSED OF OF ACCRDING TO LOCAL, STATE OR

FEDERAL LAWS.

For details see lamprecycle.org, eiag.org, or call 1-800-Samsung

Caution

When operating the product, the fluctuation of input

voltage must be within 10% of the rated voltage

and the external power outlet must be grounded,

otherwise, it may cause electric shock or malfunction

of the product. Do not connect heat-generating appli-

ances such as a hair dryer, iron or refrigerator to the

same power outlet in which the product is plugged,

otherwise it may cause a fire or malfunction of the

product. The use of an Automatic Voltage Regulator

(AVR) is highly recommended to ensure that

stable power is supplied.

Hg

Advertising