Sony HT-DDW880 - Manual (Page 62)

62 GB
E:\SEM_Janet\Year2006\Revision_Data\Revision3_HT-
DDW880\J9060043_2662263321DDW880_GB\2662263321\GB06OTH_HT-DDW880-CEL.fm masterpage: Left
HT-DDW880
2-662-263-32 (2)
8
Press control button V/v
repeatedly to select the input
you want the component video
input selected in step 6 to be
reassigned to (for example,
VIDEO 1).
In this case, select “DVD–VD1”.
When you press VIDEO 1, the image
from the component connected to the
VIDEO 1 jacks will be a component
image. The input you can reassign to
varies for each component video input.
For details, see “Assignable inputs for
component video input” below.
To return to the previous display
Press control button B.
Assignable inputs for
component video input
Notes
• You cannot reassign more than one component
video input to the same input.
• You cannot use the component video input as the
original input when it has been reassigned to
another input.
Watching HDMI images
from other inputs
(HDMI ASSIGN)
(Except for models of area code
E51)
You can reassign a HDMI input to another
input.
1
Press AMP MENU.
“1-LEVEL” appears on the display.
2
Press control button V/v
repeatedly to select “6-VIDEO”.
3
Press the control button or
control button
b to enter the
menu.
4
Press control button V/v
repeatedly to select “HDMI A.”.
5
Press the control button or
control button
b to enter the
parameter.
6
Press control button V/v
repeatedly to select the HDMI
input you want to reassign (for
example, DVD).
7
Press the control button or
control button
b to enter your
selection.
“HDMI” flashes on the display.
Component
video input Assignable
inputs Display
DVD VIDEO 1 DVD–VD1
VIDEO 3 DVD–VD3
DVD DVD–DVD
MD/TAPE DVD–MD
SA-CD/CD DVD–CD
VIDEO 2 VIDEO 1 VD2–VD1
VIDEO 2 VD2–VD2
VIDEO 3 VD2–VD3
MD/TAPE VD2–MD
SA-CD/CD VD2–CD
GB01COV_HT-DDW880-CEL.book Page 62 Wednesday, January 18, 2006 9:10 AM