About the indicators on the display – Sony HT-DDW880 User Manual
Page 7
7
GB
E:\SEM_Janet\Year2006\Revision_Data\Revision3_HT-
DDW880\J9060043_2662263321DDW880_GB\2662263321\GB03CON_HT-DDW880-CEL.fm
masterpage: Right
HT-DDW880
2-662-263-32 (2)
Gettin
g
Sta
rted
About the indicators on the display
MEMORY
L
C
R
SL
S
SR
SB
SW
LFE
SP A
SP B
RDS
STEREO MONO
D.RANGE
NEO:6
SLEEP OPT COAX
HDMI
96/24
DIGITAL EX
;
DTS-ES
;
PRO LOGIC IIx
qa
q;
qg
qh
qd
qf
qs
2
1
4
3
5
6
7
8
9
Name
Function
A SW
Lights up when the audio signal
is output from the SUB
WOOFER jack.
B LFE
Lights up when the disc being
played back contains an LFE
(Low Frequency Effect)
channel and the LFE channel
signal is actually being
reproduced.
C SP A/SP B
Lights up according to the
speaker system used. However,
these indicators do not light up
if the speaker output is turned
off or if a headphone is
connected.
D ;DIGITAL
(EX)
Lights up when Dolby Digital
signals are input.
“; DIGITAL EX” lights up
when Dolby Digital Surround
EX signals are decoded.
Note
When playing a Dolby Digital
format disc, be sure that you
have made digital connections
and that INPUT MODE is not
set to “ANALOG” (page 61).
Name
Function
E ;PRO
LOGIC (II)/
(IIx)
Lights up when the receiver
applies Pro Logic processing to
2 channel signals in order to
output the center and surround
channel signals. “; PRO
LOGIC II” lights up when the
Pro Logic II Movie/Music/
Game decoder is activated.
“; PRO LOGIC IIx” lights up
when the Pro Logic IIx Movie/
Music/Game decoder is
activated.
Note
Dolby Pro Logic IIx decoding
does not function for DTS
format signals or for signals
with a sampling frequency of
more than 48 kHz.
F DTS (-ES)/
(96/24)
Lights up when DTS signals are
input. “DTS-ES” lights up
when DTS-ES signals are input.
“DTS 96/24” lights up when the
receiver is decoding DTS 96
kHz/24 bit signals.
Note
When playing a DTS format
disc, be sure that you have made
digital connections and that
INPUT MODE is not set to
“ANALOG” (page 61).
G NEO:6
Lights up when DTS Neo:6
Cinema/Music decoder is
activated (page 50).
H MEMORY
Lights up when a memory
function, such as Preset
Memory (page 57), etc., is
activated.
continued
GB01COV_HT-DDW880-CEL.book Page 7 Wednesday, January 18, 2006 9:10 AM