Sole Control Remotes TT8 - Manual (Page 10)

TT8 -9-
Step7..
1. Install the four speed Nuts (84) on the motor cover (43).
2. Install the Motor Base Caps (39,40) with the six 5x16mm Tapping Screws (92) and two
5x16mm self-tapping Screws (87).
84
84
84
84
43
1
39
40
92
104
92
87
87
92
92
Step 8.
Install the Left Handgrip Side Caps (117,118) and Right Handgrip Side Caps (119,120) on the
top of the upright tubes (5,4) with the eight M5x10mm Phillips Head Screws (126) and four
3.5x12mm Self Tapping Screws (89) by using the Combination M5 Allen Wrench & Phillips
Head Screw Driver (104).
117 118
120
119
36
5
4
89
89
104
126
126
126
126
NOTE
:
Please Tighten All bolts After All Components Assembly Complete.