Sole Control Remotes TT8 - Manual (Page 8)

TT8 -7-
Step 1.
Remove the treadmill from the carton and lay it aside on a hard, level surface.
Step 2.
Connect the Computer Cable (32) with Computer Cable from the right upright tube (33).
33
32
Step3.
Install the Left and Right upright tubes (5,4) into the Main Frame (1). Take care installing the
right upright so that the wire harness does not get pinched or cut. Only hand-tighten all the
bolts in this step. The bolts will need to be completely tightened after the console and hand
pulse bar are installed. Install the six 5/16 x1/2 Button Head bolts (100). Put the star washer
(103) on the two 3/8 x 2 Button Head Socket bolts (101) and install in the top holes.
4
5
100
104
101
103
100
100
103
101
100
Assembly Instructions