Sony MZ-R910 - Manual (Page 113)

113
Operating Instructions
MZ-R910.3-234-699-01(1)
3 Press T MARK to erase the mark.
“MARK OFF” appears in the display.
The track mark is erased and the two
tracks are combined.
To cancel erasing
Press CANCEL on the recorder.
Press DISPLAY for 2 seconds or more on the
remote control.
Notes
• When you erase a track mark between the
two consecutive tracks that are registered
into different groups, the second track is re-
registered into the group containing the first
track. In addition, if you combine a track
that is registered to a group with a track that
is not registered to a group (two consecutive
tracks), the second track takes the same
registration setting (such as the recording
date, track name, etc.) as the first track.
However, when the group function is on,
you can only combine tracks within the
selected group.
• You cannot erase track marks according to
the system limitations.
Erasing tracks
See the illustration in Japanese text (page 60).
You can quickly erase recorded tracks, all
the tracks and data of the MD, or groups.
Note that once a recording has been
erased, you cannot retrieve it. Make
sure of the contents you are erasing.
To Erase a track
On the recorder
1 While playing the track you want to
erase, press the jog dial.
2 Turn the jog dial repeatedly until
“EDIT” flashes in the display, and then
press to enter.
3 Turn the jog dial until “ : Erase”
flashes in the display, and then press to
enter.
“Erase OK?” and “PushENTER”
appear in the display.
4 Press the jog dial to enter.
The track is erased and the next track
starts to play. All the tracks after the one
erased are automatically renumbered.
To cancel moving
Press CANCEL on the recorder.
Press DISPLAY for 2 seconds or more on the
remote control.
Adding a track mark
See the illustrations in Japanese text (page 59).
You can add a track mark so that the part
after the new track mark is counted as new
track. You cannot add a track mark on a
track that has been checked-out from your
computer.
1 While playing or pausing an MD, press
T MARK on the recorder at the point
you want to mark.
“MARK ON” appears in the display,
and the track mark is added.
To add track marks while
recording (except while synchro-
recording)
Press T MARK at the point you want to
add a track mark. You can use Auto Time
Stamp to add track marks automatically at
specified intervals (except while digital
recording).
Erasing a track mark
See the illustrations in Japanese text (page 59).
When you record with analog (line) input,
unnecessary track marks may be recorded
where recording level is low. You can erase
a track mark to combine the tracks before
and after the track mark. You cannot erase
a track mark on a track that has been
checked-out from your computer.
1 While playing the track with the track
mark you want to erase, press X to
pause.
2 Find the track mark by pressing .
slightly.
“MARK” appears in the display for 2
seconds.
02.4.30, 11:34 AM 113