Sony MZ-R910 User Manual
Page 115
115
Operating Instructions
MZ-R910.3-234-699-01(1)
Storing the settings for
individual discs (Personal Disc
Memory)
See the illustrations in Japanese text (page 64).
The recorder can store the various settings
for each disc, and then retrieve them
automatically whenever the disc is
inserted. Do the following procedure to
store the volume, playback mode, group
mode playback, playback order, sound
quality (Digital Sound Preset), and
playback speed (Speed control) settings for
a disc.
On the recorder
1
While the recorder is stopped, playing,
or play-paused, press to enter.
2
Turn the jog dial until “PERSONAL”
flashes in the display, and then press to
enter.
“Entry?” flashes in the display.
3
Press the jog dial.
“Entry OK” appears in the display and
the disc settings are stored in the
recorder.
On the remote control
1
While the recorder is stopped, playing,
or play-paused, press DISPLAY for 2
seconds or more.
2
Turn the control repeatedly until
“PERSONAL” flashes in the display,
and then press x to enter.
3
Press x to enter.
To stop the alarm
Press any button.
Notes
• The settings will be lost when you start
recording.
• The timer will begin counting down (using
the factory setting) from the moment you
select “ON” in step 3. The recorder will
begin counting down again from the
moment you change the elapsed time in step
5.
6
Press the jog dial.
Melody timer is set.
The time remaining until the alarm is
shown in the display while the recorder
is stopped or play-paused.
To show the remaining time during
play, do steps 1 to 3. After verifying the
time, press CANCEL.
On the remote control
1
While the recorder is stopped, playing,
or play-paused, press DISPLAY for 2
seconds or more.
2
Turn the control repeatedly until “M-
TIMER” flashes in the display, and then
press x to enter.
3
Turn the control repeatedly until “ON”
flashes in the display, and then press x
to enter.
4
Turn the control repeatedly to select the
alarm sound, and then press x to enter.
The time is set.
5
Turn the control repeatedly to select the
elapsed time.
To change the time quickly, turn and hold
the control.
6
Press x to enter.
The Melody timer is set.
To show the remaining time during
play, do steps 1 to 3. After verifying the
time, press DISPLAY for 2 seconds or
more.
To check the time remaining on the
alarm while playing
Follow steps 1 to 3 on the recorder or steps 1
to 4 on the remote control. The remaining time
and the selected sound appear in the display.
Press CANCEL on the recorder or DISPLAY
for 2 seconds or more on the remote control
after you checked.
To cancel setting the alarm
Press CANCEL on the recorder, or press
DISPLAY for 2 seconds or more on the remote
control.
To cancel Melody Timer
Select “OFF” in step 3.
02.5.1, 11:29 AM
115