Sony SRX- R110 - Manual (Page 8)

GB 8
Location and Function of Controls
Ch
apt
er 1 Ov
e
rv
ie
w
Versatile Setup
Various signal input
The projector is equipped with an RS232C connector and
ETHERNET connector for communication. For signal
inputs, the projector has four slots to which the optional
analog input boards and HD-SDI input boards can be
attached according to your requirement.
Optional lens
Four optional zoom lenses are available depending on the
projection distance you are setting up. The lens shift
function of this projector enables easy setup.
Location and Function of
Controls
Front/Top
a Remote control detector (front)
b Upper side ventilation holes (intake)
c Upper side ventilation holes (exhaust)
d Adjusters
Use to keep the projector level if it is installed on an
uneven surface.
e Lens cover
f Lens mount part
When attaching the optional lens, consult with qualified
Sony personnel.
g Carrying handle
Use to carry the projector. There is another handle on the
rear side.
h Front/right side ventilation holes (intake)
5 4
1 2 3
6 7 8