Samsung SHR-3040 - Manual (Page 39)

English _
!
setuP
speed setup
You can set the pan and tilt speed of the PTZ camera.
See the previous section to repeat steps 1~3. (Page 36)
Use the up/down ($%) button to select <PtZ setuP>,
and press [OK].
The “PtZ setuP” screen appears.
Use the up/down ($%) button to select <sPeeD
setuP>, and press [OK].
The “sPeeD setuP” screen appears.
Use the up/down ($%) button to move to <PaN sPeeD>
or <tilt sPeeD> and specify the applicable speed.
When done, select <OK>.
Your setting will be applied.
If you select <DeFault>, the settings will be restored to
the factory default.
To return to the previous menu, select <esc>.
.
.
.
.
.
PTZ SETUP
ESC
COMMAND SETUP
SPEED SETUP
SPEED SETUP
DEFAULT ESC
PAN SPEED 7
TILT SPEED 7
OK
02489A_SHR-3040_ENG.indb 39 2009-11-10 오후 2:13:53