Samsung SHR-3040 - Manual (Page 46)

_ setup
setup
load setup
Connect the USB device where your settings are saved.
Select <lOaD setuP>.
The DVR settings will be changed to your settings with a
message of “lOaD setuP success” on the screen.
It takes 5 to 10 seconds, depending on the USB device. This will
change the DVR settings, not the factory default.
laNGuaGe
You can select a language to your preference.
Use the up/down ($%) button to select a language.
The selected language will be applied immediately.
1.
.
`
1.
MAIN MENU
EXIT
DISPLAY SETUP
RECORD
CONFIGURATION
EXTERNAL DEVICE
BACK-UP
FIRMWARE UPGRADE
FACTORY DEFAULT
LANGUAGE ENGLISH
SHUTDOWN
FACTORY DEFAULT
DEFAULT ESC
ALL OFF
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
DISPLAY SETUP OFF
RECORD SETUP OFF
SCHEDULE SETUP OFF
CAMERA SETUP OFF
CONFIGURATION OFF
EXTERNAL DEVICE OFF
CHANGE FACTORY DEFAULT
LOAD SETUP
SAVE SETUP
02489A_SHR-3040_ENG.indb 46 2009-11-10 오후 2:14:03