Sun Microsystems StorageTek Modular Library System SL500 - Manual (Page 163)

Licensing Screen Reference
96116 • Revision: KA Chapter 4 Licensing 131
Sequence Number
Display only.
Unique sequence number assigned to the license key file by Sun Microsystems, Inc.
Note – Sequence numbers 99000 and above are permanently retained and cannot be
deleted from the library.
Value
Display only.
Qualification for the feature, if applicable. For example, for the Capacity feature, this
field displays the capacity the license provides, such as “FullBase”, “ThirdDEM”, etc.
Depending on the feature, the field may be blank or indicate “None”.
Assigned
Display only.
Indicates whether the feature is currently activated on the library. Options are:
■
Yes—Feature has been activated
■
No—Feature has been installed, but not activated; the library must be rebooted in
order for the feature to be activated.
Associated Module Capacity License Detail
Module Number
Display only.
Numeric module ID. Possible values are 1–5.
Capacity
Display only.
Total module capacity that has been licensed for use. Possible values are:
■
Full Capacity—All storage cells in the module are licensed for use.
■
None—No storage cells in the module have been licensed for use. May also
indicate that the module is not installed in the library.
■
1/3 Capacity—One-third of the storage cells in the module have been licensed.
Applies only to the DEM.
■
2/3 Capacity—Two-thirds of the storage cells in the module have been licensed.
Applies only to the DEM.
Sequence Number
Display only.
License key file sequence numbers used in providing the indicated capacity. If more
than one license key file is involved, the sequence numbers are separated by
commas.
000 indicates no license key file has been installed for the module.
nnn Cells Licensed
Display only.