Sun Microsystems StorageTek Modular Library System SL500 - Manual (Page 319)

HandBot Utility Tasks
96116 • Revision: KA Chapter 7 SL Console Diagnostics and Utilities 287
4. In the Defined Sequence section, click Add.
The TARGET screen appears.
5. Complete the TARGET screen as follows. See “Target Address Range” on page 254
for details.
■
In the Selection Mode field, click the type of cells you want to diagnose.
■
In the Minimum Address and Maximum Address fields, select the library internal
address of the starting and ending locations of the cells you want to diagnose.
6. Click Next.
The SOURCE screen appears.