Sun Microsystems StorageTek Modular Library System SL500 - Manual (Page 256)

Partition Design and Commit Screens
224 SL500 User’s Guide • July 2008 Revision: KA • 96116
Caution – Information in the SL Console partition workspace is saved to the library
controller database only through the Commit (Step 4) screen. If your SL Console
session ends or you refresh the workspace data before you have committed your
updates through the Commit (Step 4) screen, you will lose any partition changes you
have made through the Summary (Step 2) and Design (Step 3) screens and all
associated popups.
Screen Fields
Note – The screen fields are the same as those displayed in the Partitions—Design
(Step 3)—Verify Results popup.
Warnings found
Display only.
Summary error messages regarding the partition configuration.
The following hosts will need re-audited
Display only.
World Wide Port Names (WWPNs) of any hosts that should re-audit their library
partition. This may be because library resources have been deleted from the
partition.
The following hosts do not have Lun 0 set
Display only.
World Wide Port Names (WWPNs) of any hosts that have not defined any library
partitions as LUN 0 on the host.
The following orphaned cartridges were found
Display only.
Detailed information regarding all orphaned cartridges in the current partition
configuration. Includes module, row, and columnlocation of the cartridge, cartridge
volume serial number (volid), and probable causes and explanations why the
cartridge is orphaned.
Buttons
Print
Click to print the report on a selected printer.
Save
Click to save the report to a designated comma-separated text file (.csv extension).
Comma-separated files can be opened by a variety of spreadsheet and database
programs.
Yes
Click to confirm that you want to update the library controller database with the
current settings from the SL Console workspace.