Swann 4 CH Digital Video Recorder - Manual (Page 21)

SPECIFICATIONS
20
Video format NTSC/EIA or PAL/CCIR
Hard disk storage IDE type, UDMA 66, supported 250 GB HDD
Recording mode Manual / Alarm / Timer / Motion
Camera Input Signal Composite video signal 1 Vp-p 75Ω BNC, 4 channels
Main Monitor Output Composite video signal 1 Vp-p 75Ω BNC
Call Monitor Output
Composite video signal 1 Vp-p 75Ω BNC
Audio input 4 audio inputs, (RCA) *
Audio output 2 audio outputs, (RCA) **
Motion Detect Area 16 * 12 targets per camera
Motion Detect Sensitivity 99 Levels
Video Loss Detection Yes
Refresh Rate 240 field/sec. for NTSC / 200 field/sec. for PAL
Dwell Time Programmable (1~15 Sec)
Picture in Picture Yes (Movable)
Key Lock
Yes
Picture Zoom 2*2 ~4*4 (Movable)
Camera Title 8 letters
Video Adjustable Hue/ Color/ Contrast/ Brightness Adjustable
Alarm Input TTL input, Hi (5V), Low (GND)
Alarm Output COM./N.O/N.C
Remote Control RS-232 or RS-485
Time Display Format YY/MM/DD, DD/MM/YY, MM/DD/YY, OFF
Power Source DC 19V
Power Consumption <32W
Operation Temperature 10 ~ 40℃
RS-232C / RS-485 (bps) 115200、57600、19200、9600、4800、3600、2400、1200
Dimension (mm) 343(W) x 223(L) x 59(H)
Net Weight 2.0 k gs
Multiplex: Up to 30 field/sec. for NTSC / 25 field/sec. for PAL
Quad-field: Up to 120 field/sec. for NTSC / 100 field/sec. for PAL***
Quad-frame: Up to 240 field/sec. for NTSC / 200 field/sec. for PAL****
Recording Rate
• Specifications are subject to change without notice.
* 4 audio inputs, can select only 1 during operation for recording at the same time.
** with 2 mono audio outputs from the same source.
***NTSC: 4CH x 30IPS = 120 fields/sec, PAL: 4CH x 25IPS = 100 fields/sec
****NTSC: 4CH x 60IPS = 240 fields/sec,PAL: 4CH x 50IPS= 200 fields/sec