Swann 4 CH Digital Video Recorder - Manual (Page 23)

22
Remove the HDD from Cartridge
Step 4 Loose all screws on the Cartridge
Note: 1. If you want to change the different HDD, you must remove the connector from HDD (refer to
Page 21 ).
2. When HDD works for a period of time, the surface temperature will be high, please notice it.
APPENDIX #2 – REPLACE THE HDD
Step 1 Open the cap
A (locked)
B
(unlocked)
Step 2 Unlock the cabinet by turning the key
anti-clockwise
Step 5
HDD HOT SWAP FUNCTION
Please must follow the steps as following to ensure the reliability.
1)Unlock the cabinet by turning the key anti-clockwise.
2)Key in your password and press enter to disable the hard drive.
3)Pull out the HDD cartridge.
4)Replace the HDD in the tray.
Note: After turning the key to unlock position, please wait for several seconds till HDD operation
stop completely.
Step 3 Pull out the cartridge