Samsung XM2go - Manual (Page 65)

Updating Helix Firmware
Updating Helix Firmware 65
ENG
Using the Update
Tool
If you don’t use XM+Napster, you can
update the Helix firmware manually.
1. Insert the XM+Napster CD in your PC’s
CD-ROM or DVD drive. The XM+Napster
software should start automatically.
2. Click on Browse CD.
3. Click on Utils, then click on
XMFirmwareUpdateClient .
4. Follow the instructions on the PC
screen.
You can run this firmware update tool at
any time. If the firmware needs to be
updated, the tool will install it automati-
cally. If the firmware is already up-to-date,
nothing happens.
Using the Web
Point your Web browser to http://fwupdt.xmradio.com and follow directions.