Samsung XM2go - Manual (Page 73)

Settings
Settings 73
ENG
Channel Access
Direct Tune
Normally, as you scroll through live XM channels using the up and down arrow buttons, you
can preview the channel list before selecting one channel. Helix does not switch to that
channel until you push the XM button. You can change this so that Helix automatically
tunes to the channel that you’re previewing.
1. Select XM
➝ Settings ➝ Preferences ➝ Channel Access ➝ Direct Tune.
2. Select Direct Tune On.
3. Press the XM button to confirm your selection. Then press the left arrow button repeatedly
until you return to normal operation.
To return Helix to its default behavior, select Direct Tune Off.