Dynamic ip source guard binding information – SMC Networks SMC Tiger 10/100 SMC6128PL2 User Manual
Page 301

IP Source Guard
3-249
3
Dynamic IP Source Guard Binding Information
Displays the source-guard binding table for a selected interface.
Command Attributes
• Query by – Select an interface to display the source-guard binding. (Options: Port,
VLAN, MAC Address, or IP Address)
• Dynamic Binding Table Counts – Displays the number of IP addresses in the
source-guard binding table.
• Current Dynamic Binding Table – Displays the IP addresses in the source-guard
binding table.
Web – Click IP Source Guard, Dynamic Information.
Figure 3-155 Dynamic IP Source Guard Binding Information
CLI – This example shows how to configure a static source-guard binding on port 5
.
Console#show ip source-guard binding
MacAddress IpAddress Lease(sec) Type VLAN
Interface
----------------- --------------- ---------- -------------------- ---- --------
11-22-33-44-55-66 192.168.0.99 0 Static 1 Eth 1/5
Console#