SMC Networks SMC Tiger 10/100 SMC6128PL2 - Manual (Page 436)

Command Line Interface
4-128
4
Example
mac-authentication reauth-time
Use this command to set the time period after which a connected MAC address
must be re-authenticated. Use the no form of this command to restore the default
value.
Syntax
mac-authentication reauth-time seconds
no mac-authentication reauth-time
seconds - The reauthentication time period.
(Range: 120-1000000 seconds)
Default Setting
1800
Command Mode
Global Configuration
Command Usage
• The reauthentication time is a global setting and applies to all ports.
• When the reauthentication time expires for a secure MAC address it is
reauthenticated with the RADIUS server. During the reauthentication process
traffic through the port remains unaffected.
Example
Console(config)#interface ethernet 1/1
Console(config-if)#network-access link-detection link-up-down action trap
Console(config-if)#
Console(config)#mac-authentication reauth-time 300
Console(config)#