SMC Networks SMC Tiger 10/100 SMC6128PL2 - Manual (Page 331)

General Commands
4-23
4
Command Usage
This command resets the entire system. The switch will wait the designated
amount of time before resetting. If a delayed reset was already scheduled,
then the newly configured reset will overwrite the original delay configuration.
The configured delay time cannot exceed 24 days (576 hours, or 34560
minutes). If no time is specified, then the switch will reboot immediately.
Example
This example shows how to reset the switch:
reload cancel
This command cancels a pending delayed reset.
Syntax
reload cancel
Default Setting
None
Command Mode
Privileged Exec
Example
This example shows how to cancel a configured delayed reset of the switch:
show reload
This command displays the remaining time until a pending delayed reset will take
place.
Syntax
show reload
Default Setting
None
Command Mode
Privileged Exec
Console#reload
System will be restarted, continue <y/n>? y
Console#reload cancel
Console#