Sony CDX-C410 - Manual (Page 12)

12
Actual total number: Sony CDX-C410 ( E ,S,C) 3-856-126-21(1)
EN
2
Press either side of (SEEK/AMS) to select
the track number you want to skip and
press (5) (ENTER).
The indication changes from “PLAY” to
“SKIP.” If you want to return to “PLAY,”
press (5) (ENTER) again.
3
Repeat step 2 to set the “PLAY” or “SKIP”
mode on all the tracks.
4
Press (3) (PLAY MODE) for two seconds.
The unit returns to the normal CD playback
mode.
Notes
• You can set the “PLAY” and “SKIP” mode on up to 24
tracks.
• You cannot set the “SKIP” mode on all the tracks.
Playing the specific tracks only
You can select:
•BANK-ON to play the tracks with the
“PLAY” setting.
•BANK-INV (Inverse) to play the tracks with
the “SKIP” setting.
1
During playback, press (SHIFT), then
press (3) (PLAY MODE) repeatedly until
“BANK” appears.
2
Press (4) (n) repeatedly until the
desired setting appears.
z BANK-ON z BANK-INV z BANK-OFF
Playback starts from the track following the
current one.
To go back to the normal playing mode, select
“BANK-OFF” in step 2 above.
Locating a disc by name
— List-up (CD changer with custom file
function or MD changer)
You can use this function for the discs that
have been assigned a custom name. For more
information on disc names, refer to “Labeling a
CD” (page 11).
1
Press (LIST) momentarily.
The name assigned to the disc currently
playing appears in the display.
2
Press (LIST) repeatedly until you find the
desired disc.
3
Press (5) (ENTER) to play back the disc.
Notes
• Once a disc name has been displayed for five seconds, the
display goes back to its normal playback mode. To turn
off the display, press (DSPL).
• The track names are not displayed during MD playback.
• If there are no discs in the magazine, “NO DISC”
appears in the display.
• If a disc has not been assigned a custom file, “********”
appears in the display.
• If the disc information has not been read by the unit,
“NOT READ” appears in the display. To load the disc,
first press the number button, then choose the disc that
has not been loaded.
• The information is appear only in upper cases. There are
also some letters which cannot be displayed (during MD
playback)
Selecting the specific
tracks for playback
— Bank (CD changer with custom file
function)
If you label the disc, you can set the unit to
skip tracks and play only the tracks you want.
1
Start playing the disc and press (SHIFT).
Then press (3) (PLAY MODE) for two
seconds.
Bank edit mode
Note
If you have not labeled the disc, the bank edit mode
does not appear.
SUR
ENTER
DISC
1
LST
EQ
SCHUBERT
SUR
PLAY MODE ENTER
DISC TRACK
5
CD2
EQ
1
SUR
PLAY MODE ENTER
DISC TRACK
5
CD2
EQ
3 SKIP
SUR
PLAY MODE
BANK
CD1
EQ
BANKON