Other functions, Adjusting the sound characteristics, Muting the sound – Sony CDX-C410 User Manual

Page 8: Locating a station by name

Advertising
background image

8

Actual total number:

Sony CDX-C410 (

E

,S,C) 3-856-126-21(1)

EN

Other Functions

Adjusting the sound
characteristics

You can adjust bass, treble, balance and fader.
Each source can store the bass and treble level
respectively.

1

Select the item you want to adjust by
pressing
(SOUND) repeatedly.

VOL (volume) n BAS (bass) n TRE
(treble) n BAL (balance) n FAD (fader)

2

Adjust the selected item by pressing (+)
or (–).
Adjust within three seconds after selecting.
(After three seconds, the buttons work as
volume control buttons.)

Muting the sound

Press (MUTE).
“MUTE-ON” flashes.

To restore the previous volume level, press
(MUTE) again.

Displaying the station name

Press (DSPL) during radio reception.

Each time you press (DSPL), the item
changes as follows:

z Station name* z Frequency z Clock

*

If the station name is not stored, “NO NAME”
appears in the display for one second.

Erasing the station name

1

Tune in any station and press (LIST) for
two seconds.

2

Press (DSPL) for two seconds.

3

Press (+) or (–) to select the name that
you want to erase.

4

Press (5) (ENTER) for two seconds.
The name is erased.
Repeat steps 3 and 4 if you want to erase
other names.

5

Press (LIST) for two seconds.
The unit returns to the normal radio
reception mode.

Locating a station by
name

— List-up

1

Press (LIST) momentarily.
The name assigned to the station currently
playing appears in the display.

2

Press (LIST) repeatedly until you find the
desired station.

3

Press (5) (ENTER) to tune in the desired
station.

Note
Once the station name or frequency has been displayed for
five seconds, the display goes back to its normal mode.
To turn off the display, press
(DSPL).

SUR

3

FM1

EQ

WRKISS

SUR

ENTER

3

LST

EQ

WRKISS

Advertising