Sony WEGA KV-29FQ76 K - Manual (Page 66)

16 Advanced Operation
Sound Adjustment menu
This menu allows you to customise the sound. Highlight the required option and press b to select.
The table below explains each option and how to use it.
Option How to use
Sound Effect
This option allows you to select one of four sound
modes.
Press V or v to select Personal, Dolby V * , Dynamic ** or
Natural ** . Press OK to confirm.
Equaliser Adjustment
This option allows you to customise the sound by
adjusting five frequency bands.
Note: This feature is only available when Sound Effect is
set to Personal.
Press B or b to select the required band. Press V or v to
adjust the frequency level. Press OK to confirm.
Virtual Effect
This option allows you to adjust the level of the surround
sound effect when listening to a Dolby surround sound
broadcast.
Note: This option is only available when Sound Effect is
set to Dolby V.
Press B or b to set the level of effect. Press OK to
confirm.
Balance
This option allows you to set the balance of sound
between the left and right speakers.
Press B or b to set the balance. Press OK to confirm.
Auto Vol. Control
Sometimes the broadcast volume level changes (e.g.
adverts tend to be louder than programmes). This option
allows you to cancel this effect, giving a constant volume
level.
Press V or v to select Off or On. Press OK to confirm.
Dual Sound
When receiving a bilingual broadcast: This option
allows you to choose which language to listen to.
When receiving a stereo broadcast: This option allows
you to choose between mono or stereo sound.
When receiving a bilingual broadcast: Press V or v to
select A to listen to the first language or B to listen to the
second language. Press OK to confirm.
When receiving a stereo broadcast: Press V or v to
select Mono or Stereo. Press OK to confirm.
/Audio-out Vol.
This option allows you to simultaneously set the volume
level for the headphone socket and the volume level of
the Audio output sockets on the rear of the TV. Press B or b to set the volume for the headphone and
Audio output sockets. Press OK to confirm.
Dual Sound
This option allows you to alter the sound settings when
the TV is in PAP mode. The settings available are:
Stereo: The sound from one screen is output to both the
TV loudspeakers and the headphones.
PAP: The sound from the left screen is output to the
TV loudspeakers and the sound from the right
screen is output to the headphones.
Press V or v to select Stereo or PAP. Press OK to
confirm.
Notes: * When ‘Dolby V’ is selected, the TV simulates the full effects of Dolby Pro Logic Surround sound without
the need for additional speakers. Manufactured under license from Dolby Laboratories. ‘Dolby’, ‘Pro
Logic’ and the double-D symbol are trademarks of Dolby Laboratories.
** ‘Natural’ and ‘Dynamic’ are functions of the ‘BBE High Definition Sound System’. This system
enhances clarity, detail, presence of sound and increases musical realism.
1 2 3
4 5 6
7 8 9
0
MODE
29FQ76 B5 Part 4 GB.fm Page 16 Tuesday, May 7, 2002 11:55 AM