Step 4: performing the quick setup, Step 4: performing the quick, Setup – Sony DAV-HDX589W User Manual
Page 35
35
US
Ge
tting Star
te
d
To attach the cover to the
surround amplifier
After connecting and setting, you can attach the
cover to the surround amplifier for organizing
and storing excess speaker cords.
1
Attach the speaker cord cover by
sliding it down along the grooves at the
edges of the surround amplifier.
Push the speaker cord cover down until you
hear a click. Turn the surround amplifier
upside down, then store the cords in the
speaker cord cover.
2
Insert the tabs of the speaker cord
holder in the slots of the speaker cord
cover, and press it into place.
Step 4: Performing the
Quick Setup
Follow the Steps below to make the basic
adjustments for using the system.
Displayed items vary depending on the area.
1
Turn on the TV.
2
Press [/1 on the unit, and POWER on
the surround amplifier.
Note
• Make sure that the function is set to “DVD”
3
Switch the input selector on your TV so
that the signal from the system
appears on the TV screen.
[Press [
ENTER
] to run QUICK SETUP.]
appears at the bottom of the TV screen. If
this message does not appear, recall the
Quick Setup display (page 37).
4
Press
without inserting a disc.
The Setup Display for selecting the
language used in the on-screen display
appears.
Speaker cord cover
Surround amplifier
Grooves
Speaker cord holder
Surround amplifier
m
"/1
DISPLAY
C/X/x/c,