Sony DAV-HDX589W - Manual (Page 65)

Dis
c
65 US
x [PARENTAL CONTROL]
You can set the playback restrictions. For
details, see “Restricting Playback of the Disc”
(page 58).
x [MULTI-DISC RESUME] (DVD VIDEO/
VIDEO CD only)
You can set the [MULTI-DISC RESUME]
function to on/off.
[ON]: The system stores the resume points in
memory for up to 10 discs.
[OFF]: The system does not store the resume
points in memory. Playback restarts at the
resume point only for the current disc in the unit.
x [RESET]
You can return the [SET UP] settings other than
[PARENTAL CONTROL] to the default
settings. For details, see “Returning the
[SETUP] settings to the default” (page 87).
To obtain the best possible surround sound, set
connection of the speakers and their distance
from your listening position. Then use the test
tone to adjust the level and the balance of the
speakers to the same level.
x [CONNECTION]
If you do not connect center or surround
speakers, set the parameters for [CENTER] and
[SURROUND]. Since the front speaker and
subwoofer settings are fixed, you cannot change
them.
[FRONT]
[YES]
[CENTER]
[YES]: Normally select this.
[NONE]: Select this if no center speaker is used.
[SURROUND]
[YES]: Normally select this.
[NONE]: Select this if no surround speakers are
used.
[SUBWOOFER]
[YES]
Note
• When you change the [CONNECTION] setting, the
[STANDARD] of [SPEAKER FORMATION]
setting remains the same, but the other settings of
[SPEAKER FORMATION] return to
[STANDARD].
x [DISTANCE (FRONT)]
When you move the front speakers and center
speaker, be sure to set the parameters of the
distance (A) from the listening position to the
speakers.
You can set the parameters from 1.0 to 7.0
meters
1)
(3 to 23 ft) for the front speakers, from
0.0 to 7.0 meters
2)
(0 to 23 ft) for the center
speaker.
[L/R] 3.0 m/10 ft 3) : Set the front speaker
distance.
[CENTER] 3.0 m/10 ft
3)4) : Set the center speaker
distance (up to 1.6 meters (5 ft) closer to the
front speakers).
1) 0.9 to 6.9 meters for North American models.
2) 0.0 to 6.9 meters for North American models.
3) When you perform the Quick Setup (page 35), the
default settings are changed.
Settings for the speakers
[SPEAKER SETUP]
SPEAKER SETUP
DISTANCE(FRONT):
CONNECTION:
DISTANCE(SURROUND):
LEVEL(FRONT):
LEVEL(SURROUND):
TEST TONE
FRONT:
CENTER:
SURROUND:
SUBWOOFER:
YES
YES
YES
YES
A