Sharp MX-2700N - Manual (Page 23)

22
Paper that cannot be used
• Special media for inkjet printers (fine paper, glossy
paper, glossy film, postcards, etc.)
• Carbon paper or thermal paper
• Pasted paper
• Paper with clips
• Paper with fold marks
• Torn paper
• Oil-feed transparency film
• Thin paper less than 55 g/m 2 (15 lbs.)
• Heavy paper 210 g/m 2 (57 lbs.) or over
• Return postcard with a fold
• Irregularly shaped paper
• Stapled paper
• Damp paper
• Curled paper
• Paper with a wave-like pattern due to moisture absorption
Paper that is not recommended
• Iron-on transfer paper
• Japanese paper
• Return postcard without a fold • The reverse side of paper already printed on by
another printer or copier.
• Perforated paper
• Various types of plain paper and special media are sold. Some types cannot be used with the machine. Contact your
dealer or nearest authorised service representative for advice on suitable paper.
• The image quality and toner fusibility of paper may change due to ambient conditions, operating conditions, and paper
characteristics, resulting in image quality inferior to that of SHARP standard paper. Contact your dealer or nearest
authorised service representative for advice on suitable paper.
• The use of non-recommended or prohibited paper may result in skewed feeding, misfeeds, poor toner fusing (the toner
does not adhere to the paper well and can be rubbed off), or machine failure.
• The use of non-recommended paper may result in misfeeds or poor image quality. Before using non-recommended paper,
check if printing can be performed properly.