Sharp MX-2700N - Manual (Page 48)

47
6
Insert a new staple cartridge into the
staple case.
Push the staple cartridge in until it clicks into place.
Do not remove the seal from the cartridge before inserting the cartridge into the case.
7
Pull the seal that holds the staples
straight out.
8
Replace the staple case.
Push the staple case in until it clicks into place.
9
Push the stapler section back in.
Push the stapler section back in until it locks into its original
position.
10
Close the front cover.
Make a test print or copy in staple sort mode to verify that stapling takes place correctly.