Sharp MX-2700N - Manual (Page 21)

20
This chapter explains how to load paper in the machine's trays.
IMPORTANT POINTS ABOUT PAPER
This section provides information that you should know before loading paper in the paper trays.
Be sure to read this section before loading paper.
NAMES AND LOCATIONS OF TRAYS
The trays are identified by the names indicated below. For the sizes and types of paper that can be loaded in each tray,
see the Safety Guide.
Tray numbers
The tray numbers vary depending on the peripheral devices that are installed.
The explanations in this manual assume that a stand/2 x 500 sheet paper drawer and large capacity tray are installed.
If your machine has a stand/1 x 500 sheet paper drawer and a large capacity tray installed, substitute "Tray 4" wherever "Tray 5"
appears in this manual.
2
LOADING PAPER
Peripheral devices
installed
The machine
Stand/1 x 500
sheet paper
drawer
Stand/2 x 500 sheet paper
drawer
Large
capacity tray
First tray Second tray First tray Second tray
Stand/1 x 500 sheet paper
drawer + Large capacity
tray
Tray 1 Tray 2
Tray 3 – – Tray 4
Stand/2 x 500 sheet paper
drawer + Large capacity
tray
– Tray 3 Tray 4 Tray 5
None installed – – – –
Tray 1
Tray 2
Tray 3 (when a stand/1 x 500 sheet
paper drawer or a stand/2 x 500
sheet paper drawer is installed)
Tray 4 (when a stand/2 x 500 sheet
paper drawer is installed)
Bypass tray
Tray 5 (when a large capacity tray is installed)